Loading Zoom, please wait
Simplex Health Complete Water Quality Test Kit 13-in-OneSimplex Health Complete Water Quality Test Kit 13-in-OneSimplex Health Complete Water Quality Test Kit 13-in-OneSimplex Health Complete Water Quality Test Kit 13-in-OneSimplex Health Complete Water Quality Test Kit 13-in-OneSimplexHealth Complete Water Quality Test Kit 13-in-One

Simplex Health Complete Water Quality Test Kit 13-in-One

Price Starting at: £45.98£42.99Save: 7% off

Bulk Order Discount (Unit Price)
1
£42.99
2-3
£34.39
4+
£32.24
Description

This Water Quality Test Kit is ideal to test the levels of 13 different elements, allowing you to identify potential issues in your water quality so you know how to correctly treat your water.

This test kit includes 1 x SimplexHealth 12 in One & 1 x Watersafe Lead Test Kit and saves £3 compared to buying separately

This kit tests for: coliform bacteria, nitrate, nitrite, hydrogen sulfide, total hardness, total alkalinity, total chlorine, free chlorine, copper, sulfate, iron & pH PLUS Lead

Suitable for: fresh and potable water samples, including water from taps, wells, springs, boreholes, ponds, rain water as well as water stored in tanks.

This test kit contains 2 tests for each parameter and 1 test for bacteria & 1 test for Lead - totalling 24 tests.

  • Simple Dip-Wait-Read method
  • Quick and easy to use, no training required
  • Reliable and accurate testing
  • Each kit contains everything required to carry out the tests
  • Convenient way to check water for 13 of the top water quality concerns
  • Results are available immediately, only the bacteria test takes 24 to 48 hours
  • Test kit is easy and safe to use (MSDS is not required)
  • Each kit contains:
    • 1 x coliform bacteria test, with simultaneous E.coli detection
    • 1 x lead test with presence/absence measured at a level of 15ppb (= 0.015 mg/l)
    • 2 Tests for each: free & total chlorine, nitrate & nitrite, hardness, pH, total alkalinity, iron, copper, sulfate and hydrogen sulfide
    • Detailed test instructions, colour chart as well as additional information including how to understand the test results.

Because the kit contains 2 tests each (except for bacteria & lead) - it is very suitable to test the effectiveness of your water filtration system. Simply test your water before and after treatment and compare the results.

Excellent value - buy 2 or more test kits and receive a 15% discount

Simple Dip-Wait-Read method

This test uses our simple Dip-Wait-Read Method for testing free & total chlorine, nitrate & nitrite, hardness, pH, total alkalinity, iron, copper, sulfate and hydrogen sulfide. To view the full Instructions click here

Bacteria Test

How to use (please refer to product for detailed instructions):

  1. Fill mug with 100ml of water sample to be tested and securely recap bottle.
  2. Shake the mug until all media is dissolved, solution should be clear yellow.
  3. Incubate for 24 hours or 48 hours, depending on temperature.
  4. After incubation time, observe the colour of the sample: a. clear yellow = negative for coliforms; b. blue-green = positive for coliforms
  5. E.coli confirmation: shine a blacklight from the bottom of the sample: no fluorescence = negative for E.coli; blue fluorescence = positive for E.coli*
  6. Dispose of water sample safely

*a blacklight with a wavelength of 365 is recommended , ie. the NVF-4 blacklight

 

PLUS  Lead Test

The UK maximum contaminant level for Lead in tap water set by DWI/DEFRA is 10µg/l (= 0.01mg/l = 0.01ppm).

Download the Watersafe Lead Water Test Flyer here

Sensitivity: presence/absence measured at a level of 15ppb (= 0.015 mg/l)

How to Use the Lead Test:

 

  • 1. Open Lead packet and take out all contents. The foil packet contains a test vial, a dropper pipette, one test strip, and a desiccant (to be discarded).
  • 2. Using dropper, place water sample into test vial. To pick up the sample, tightly squeeze the bulb at the end of the dropper and place the open end into the water sample. Release the bulb to pick up the sample, then squeeze again to expel the sample into the vial. Use only one pipette-full of water.
  • 3. Swirl vial gently for several seconds. Place on a flat surface.
  • 4. Place test strip into the test vial, with arrows pointing DOWN.
  • 5. Wait 10 minutes. Do not disturb strips or vial during this time. Lines will appear on the strip.
  • 6. Take the strip out of the vial and read result.

Negative: Bottom line (next to number 1) is darker than the top line (next to number 2).

Positive: Top line (next to number 2) is darker than the bottom line (next to number 1), or lines are equally dark.



 

If a test strip shows a positive result, your water sample may contain lead at a toxic level. Take appropriate action.

Sensitivity & Test time:

Test Sensitivity Result Time
Iron 0.0, 0.05, 0.1, 0.3, 1.0 ppm (mg/l) 25 seconds
Copper 0.0, 0.1, 0.5, 1.0, 2.0 ppm (mg/l) 50 seconds
Nitrate 0, 2, 10, 20, 50 ppm (mg/l) 1 minute
Nitrite 0, 0.2, 1, 1.5, 3 ppm (mg/l) 1 minute
pH 2, 4, 5, 6.5, 8.5, 9.5, 10.5, 12 30 seconds
Total Alkalinity 0, 40, 80, 120, 180, 240, 500 ppm (mg/l) 30 seconds
Total Chlorine 0, 0.1, 0.2, 0.5, 0.8, 1, 4, 10 ppm (mg/l) 40 seconds
Total Hardness 0, 50, 120, 250, 425, 1000 ppm (mg/l) 30 seconds
Free Chlorine 0, 0.05, 0.2, 0.6, 1.5, 4, 10 ppm (mg/l) 45 seconds
Sulfate 0, 250, >500 ppm (mg/l) 35 seconds
Hydrogen Sulfide 0.3, 0.5, 1, 2 ppm (mg/l) 30 seconds
Bacteria* present/absent 24-48 hours
Lead presence/absence measured at a level of 15ppb (= 0.015 mg/l) 10 minutes

*The bacteria test kit detects total coliform (which is  faecal bacteria for the most part) and is a presence/absence test of 1cfu/ml. Should the result be positive, then the presence of E.coli can be detected using a blacklight with a wavelength of 365 (like the NVF-4 blacklight).

Not sure which is the right water testing kit for you? Click here to compare our range of multi-pack options.

 
Please note: that this is a screening test and can not be used to certify water as safe or unsafe for drinking. This test kit provides approximate results ONLY when used in strict accordance with instructions. SimplexHealth expressly disclaims any liability resulting from the use of this product, failure to follow instructions or reliance of test results. This is not a measuring instrument. Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids. Do not touch test pad and do not consume water which has been tested.
 
 
Ref: SH13-in-1 Stock Status: 3 Units in Stock Manufactured by: SimplexHealth
Shipping

100% FREE Shipping


We ship orders daily Monday - Friday (except bank holidays) and offer the following options:

Orders to UK Mainland UK Address:

  • Order by 12 Noon for same day dispatch
  • FREE Super Saver 3-5 business days
  • EXPRESS 1-2 business days - only £0.99 for orders of less than £75 and £2.99 for orders of £75 or more

Orders to Europe*:

  • Order by 12 Noon for same day dispatch
  • FREE Shipping via Royal Mail International or courier

Orders to Rest of World:**

  • Order by 12 Noon for same day dispatch
  • FREE Shipping via Royal Mail International

We can ship worldwide - please contact us to obtain a quote for your destination.

Special next day delivery available - please contact us to book.

PLEASE NOTE

  • Higher value orders may be shipped using recorded delivery or courier at no extra cost to ensure safe arrival.
  • *Shipments to an European Address may take as long as 4-6 working days.
  • **Shipments to a Rest of World address can take 14 + days to arrive, also depending on the speed of customs.
  • All delivery times are estimates and depend on local courier services as well as processing times through Customs.
  • If the country that is receiving your order has strong regulations regarding the importation of goods including nutritional supplements, SimplexHealth cannot be held responsible for any additional fees incurred by Customs and/or Quarantine scanning. We also cannot accept responsibility for items returned by Customs.

Mainland UK includes: England, Scotland, Wales and all BFPO addresses.

Reviews
Product Reviews
4.9 out of 5 stars
5 out of 5 stars Saturday 07 March, 2020 By good!
We used this product to test our well
water. For the first set of strips ww tested water from our supply, and the second set from our neighbours.
5 out of 5 stars Wednesday 24 May, 2017 By Tracy Lin
This kit has very simple to use with clear concise instructions. It did exactly what I wanted it to do and allowed me to test the quality of our well water.
5 out of 5 stars Thursday 06 April, 2017 By we trust and highly recommend simplex health as our supplier of
as a company we trust and highly recommend simplex health as our supplier of water quality screening kits.
we have used them in excess of a hundred times and never once had any issues.
products = great
customer service = excellent!

ATW Environmental Services Limited
5 out of 5 stars Saturday 28 January, 2017 By Mel C
The test kit was simple and easy to use and gave results with no hassles. I would highly recommend to others who are worried about the quality of their water.
5 out of 5 stars Thursday 11 August, 2016 By Abraham John
We used this product to test our well
water. For the first set of strips ww tested water from our supply, and the second set from our neighbours. The tests followed properly showed no real problem with our water. We do recommend to read the instructions for each individual test.

 Read More Reviews