Water John's Copper Test kit - 25 tests

These patented water quality test strips are formulated to test well water, tap water or stream water.

• Obtain test results within 2 minutes
• Test strips feature easy-to-read colors
• No hazardous reagents

This water quality test promises to be an attractive alternative to wet chemical copper tests for several reasons. There are no hazardous chemicals to mix (an MSDS is not required); quick results are obtained in less than 2 minutes; no identified interferences; and, best of all, the Copper water test strips are safe and easy to use for fast accurate results within the ranges of 0 to 2 ppm (mg/L), which permits the measurement of typical copper levels found in well, tap, and stream water. The test is very convenient to run: dip test strip into sample for 15 seconds with constant back and forth motion, remove, and match color after 30 seconds to quantify the Copper level in the sample.

The UK maximum contaminant level for Copper in tap water set by DWI/DEFRA is 2.0 mg/l.

Accurate water quality test results for home, lab, and on-site have never been this easy.

Specification:
Description: Copper Cu⁺¹ / Cu⁺² - Free / Dissolved
Quantity: 25 tests
Range: 0, 0.05, 0.1, 0.2, 0.4, 1.0, 2.0 ppm (mg/l)

Made in USA