Water Bromine Check - 50 tests

These Bromine test strips are perfect for determining whether or not you
have the correct amount of sanitizer in pools and spas present. These Bromine test strips are sold in bottles of 50 test strips and all of the reagents are impregnated on the test strip pad. There are no chemicals to mix, results are obtained in 30 seconds, and the test strips are safe to use with no hazardous chemicals (no MSDS required).

How to Use:

1) Dip one test strip into a 10ml water sample for 5 or 30seconds (depending on test method) with a gentle  back and forth motion.

2) Remove the strip and shake once, briskly, to remove excess water.

3) Wait 30 seconds, then match with colours on colour chart. Complete colour matching within 15 seconds.

Contains: 50 strips

Sensitivity: 0, 0.05, 0.1, 0.25, 0.5, 0.75, 1.0, 2.0, 3.0, 4.0, 5.0 ppm (mg/L)

Total Test time: 30 seconds

Interferences: Bromamines, Chlorine, Iodine and Ozone will give a similar colour reaction.